+8617728302086
Product Introduction Specification
1. The rack has no circuit design, stable operation, and convenient maintenance.
2. Divided structure design with four major components, easy installation, and small footprint.
3. Movable types of filming bed meets the needs of different film positions.
Hot Tags: manual x-ray photography bed, China manual x-ray photography bed manufacturers, suppliers, factory, X-Ray Detector Rack, Vehicle mounted x ray table, X ray Detector Rack
YSXMF-1
| Generator | |
| Power voltage： | 1-phase 220VAC ±10%,50Hz,16A;3-phase 380VAC± 10% |
| Maximum Working Frequency | ≥30KHz |
| Nominal Electric Power | 32kw(@100kv,320mA,100ms) |
| KV range | 40~125KV |
| mA range | 10~400mA |
| mAs range | 0.1~500mAs |
| Filming Bed | |
| Size | length 2000 * Width 703 * Height 695mm (Castor height 150mm) |
| From Left to right movement distance of the tray under the bed | 1065mm |
| X-ray tube track size | 2100*445*135mm |
| X-ray tube pillar size | height 2085 * 260 * 220mm (a height of 2255mm after installation) |
| The Movement distance toward the front or back direction | 1700mm |
| X-ray tube support arm | |
| Length | 615mm |
| The highest distance from the ground | 1835mm |
| the lowest distance from the ground | 460mm |
| The movement distance from up and down | 1350mm |
| Chest X-ray holder | |
| Holder size | Height 2055mm* Width 205mm* thickness 185mm |
| Chest X-ray box | Width 570mm*580mm |
| The highest distance from centre position to the ground | 1730mm |
| The lowest distance from centre position to the ground | 440mm |
| The distance of up and down movement | 1290mm |
Send Inquiry
